这段代码太复杂了。
# Section \"FLASH MOD CHIP or XBOX ON-BOARD TSOP\"
# {
# Line \"--- W A R N I N G! ---\",1
# Line \"-- THIS CAN KILL YOUR XBOX / MOD! --\",1
# Section \"I understand the risks and & I want to continue\"
# {
# Line \"-- CAREFULL, U COULD KILL YOUR BOX / MOD! --\",1
#
# Item \"5b3) Flash MOD ONLY ON v1.6 w/ EvoX-M8 v16 *FC* F:&G:\",@279
#
# Line \"------------------------------------\",2
#
# Line \"- TSOP Needs Both Bridge Points on MB!-\",1
# }
# Line \"- Read FLASH Tutorials First! -\",1
# }
并且还要加这段：
[Action_79]
Info \"Flash MOD CHIP ONLY ON v1.6! Xbox\"
Warning \"With Evox-M8 v16 *FC* F: & G: (67)\"
Warning \"This will give you G: if your HD >137GB\"
Warning \"Boots F:&C:evoxdash.xbe / C:avadash.xbe
Warning \"Once Complete the Xbox will self Reset\"
Warning \"To BE USED on v1.6 Xbox ONLY!\"
Warning \"Unit Must be operating without a Mod Chip\"
Warning \"If Uncertain, Turn Off Xbox to Abort!\"
flashbios \"\\bioses\\evoxM8largesupport.bin\"
我昨晚的经验：
在 Item \"System Settings\",ID_Settings 或者其他ITEM的下面，直接加一句话：
Item "Flash BIOS",@1
同时把BIOS文件拷贝到C盘的BIOS目录下，点"FLash BIOS"的时候，就会自动浏览这个目录，然后做选择，确定就可以了。
ps:参考了置顶贴 ：EvolutionX INI 中文手册
@1= Flash the BIOS
