由于北美最近的版本都是0078了
本来想等这里的高手们翻译教程的，可能高手都是很忙或者国内0078还没有普及~顶贴几天都没有更新 呵呵（由于我还没有买xbox360，所以只能纸上谈兵，见谅，本人英语水平也不高，也怕理解错意思误导大家就不好，后面会放出原文）
原论坛讨论贴链接
http://forums.xbox-scene.com/index.php?showtopic=572413
准备的软件：1：Maximus 360 Firmware Toolbox v3.0
2：slax 2.0 的iso 并刻录为cd（请大家放狗去找）
使用方法：
------------------
第一部分（进入modeb，令电脑能检测出xbox 360的光驱）：
更新slax 2.0的最新版本让其具有更广的兼容性（也支持SATA>USB适配器，但不推荐，原论坛有部分人SATA》USB不成功的），如果你的主板支持 RAID功能，记得在bios设置里面关闭 slax 2.0下载后是一个iso文件，随便用nero imgburn等工具直接烧录镜像即可。烧好的slax 碟是一个可启动的linux盘，放入你的电脑光驱中！！而不是xbox 360的光驱中。
关闭你电脑与xbox 360的电源，记得xbox 360要连接好电源与视频输出，而已确定xbox 360 与你的电脑都接好了地线（保证你操作时候的安全 囧），xbox 360的光驱连接在电脑主板的SATA接口上。
按下你的电脑开机键，并用salx cd启动，当你看到slax 的图标后，按下你的xbox 360电源键启动（要快，这个时间不是很长）。然后让slax继续运行，如果你看到“Spinning up disc”就按下xbox 360光驱的退盘键，让它继续，然后你就会看到一个登入的画面让slax继续操作
如果光驱已经在ModeB的话，下面的情况就会出现：
1.当按下退盘键的话，光驱会弹出 关闭两次
2.当你用退盘键关闭你的光驱的时候，光驱的托盘会自动再弹出在几秒后
当你确认你360的光驱已经在ModeB后，重启你的电脑，从电脑光驱中出slax的的碟，让电脑正常启动。当看到Windows的读取进度条时，不断的按360的退盘键让它开/关几次（让windos认出你的光驱）。当你进入系统后，在我的电脑-属性-硬件-系统管理中看看 (CD/DVD 驱动器有没有多出你的360光驱。
看到的话~可以进行第二部分咯
第二部分（用Maximus 360 Firmware Toolbox v3.0进行光驱破解）
此部分由于有视频教学，所以比较简单易学~~
http://www.youtube.com/watch?v=KSSPmAAtMUk
1. 首先打开Maximus 360 Firmware Toolbox v3.0
2. 打开Tools > Direct Drive Dump (GDR Only)（确定你的360光驱是否能识别）
3. 选择你要操作的光驱。当然你0078结尾的360光驱啦
4. 按下 "RAW Dump Firmware As ..."（保存原始光驱的固件）
5. 保存原始光驱固件，并命名 original.bin（自己记住保存的路径哦）
6. 然后就弹出界面问你是否确立破解。。。当然要“Yes”咯
7. 回到原始界面了，再去Tools > Smart Hack Patcher
8. 循例提醒你一下，然后你接受 “accept it”
9. 给我略过了 没什么内容 囧
10. 要选择破解bin的存放路径，先点击 "output file" ，然后选择路径并自己输hacked.bin
11. 确认你的修改是针对 Hitachi v78 drives
12. 点击 "Generate File"
13. 再问你是不是确认打开该固件, 选择 "Yes"
14. 回去界面上门的 “Tools > Direct Drive Flash (GDR Only)”
15. 子界面选择 “Differential Flash (PATCH)”
16. 选择 Hitachi DVD drive 从下拉条中
17. 点击 "Read Drive and Detect Differences"
18. 选择 "Start Flashing" 然后等待（很快）
19. 大功告成
下面的英文的原文，大家参考 我的翻译水平不怎么样 呵呵
Use Slax 2. This updated version by Probutus includes support for a much greater range of chipsets, including the VIA cards. It also supports SATA > USB adaptors. If you are using onboard SATA, make sure RAID is disabled in your BIOS. Slax 2 works much better than Slax 1, and it's faster! The Slax download is an ISO image file, you can burn it with any ISO Image burning software like Nero or IMGBurn. The Slax disc is a bootable Linux disc, that needs to be put in your PC drive, not the Xbox 360 Hitachi drive. With both the Xbox 360 and PC powered off, hook up both power and video cables to the Xbox 360, and ensure a ground between the Xbox 360 and your PC. Hook up the Hitachi drive via a SATA cable. Boot up your PC and boot from the Slax CD. As soon as you see the Slax cloverleaf, power on your Xbox 360. (hurry, it doesn't stay there long) Let Slax go. If you get "Spinning Up Disc.." then eject the Hitachi drive and it will continue. When you reach the login screen for Slax do the following.
To verify that your drive is in ModeB, one of the following must be happening:
1. The drive takes two presses of the eject button to open/close.
2. When closing the drive using the eject button, the drive tray will auto-eject back open a few seconds later.
Once you have verified the drive is in ModeB, restart your PC, eject the Slax disc, and let it boot. When it gets to the Windows loading bar, eject the Hitachi drive open and closed a few times so that Windows will recognize the drive. When you first get Windows loaded, check device manager (CD/DVD Drives) before anything else. If you see your drive in there, good.
1. Open 360 Firmware Toolbox v3.0
2. Tools > Direct Drive Dump (GDR Only)
3. Choose your DVD drive from the drop-down list (there should only be one)
4. Click the button labeled "RAW Dump Firmware As ..."
5. Save the original firmware as original.bin somewhere safe
6. It will tell you that the firmware has been dumped and ask if you want to open it, select "Yes"
7. Make sure everything looks pretty normal, nothing out of the ordinary
8. Go to Tools > Smart Hack Patcher
9. Read the warning and then accept it
10. On the line labelled "output file" click the box to the right with the ellipsis (three dots) and save your output file as hacked.bin
11. Make sure the rule set is for Hitachi v78 drives
12. Hit "Generate File"
13. Again, it will ask if you want to open the firmware, select "Yes"
14. Go to Tools > Direct Drive Flash (GDR Only)
15. Select Differential Flash (PATCH)
16. Select your Hitachi DVD drive from the drop-down list
17. Hit "Read Drive and Detect Differences"
18. Select "Start Flashing" and wait for it to finish (very fast)
19. Test it all out
20. Donate to Maximus if it worked
Don't forget to plug that small black sata cable back in so your Hitachi drive is actually connected to the Xbox 360 motherboard! Also, make sure you power-cycle the system twice after flashing. I'm not sure if this version has the "ModeB on Open Tray" but if it does, it means that you will have to power-cycle twice after flashing the first time. This is because you probably flashed the drive with it open, and when you powered it off the first time, the tray remained open. Then, when you power back up, it will be in ModeB because of the ModeB on Open Tray. So.. you have to power cycle again to go back to normal mode.
Slax 2 does work with SATA > USB adapters, and yes, you can use pretty much any generic no-name cheapo SATA > USB adapter. I got one off ebay for $17 shipped and I used it last week on my laptop to flash two Hitachi 47 drives. Works great with Slax 2 and was able to flash both drives just fine.
